Laminate Flooring Installation Dallas

Laminate Flooring Installation Dallas

No.1 Best Laminate Flooring Installation Dallas - Toscana Remodeling Ultimately, you receive the value corresponding to your payment. If you’re looking for new flooring and have a limited budget, laminate flooring might be the right option for you. Laminate is known as one of the more affordable types of flooring; plus, its installation process is typically something you can DIY. All it takes is a little time and patience and you can save some money by installing your flooring on your own.

Below is a basic guide to laminate flooring installation Dallas. Later on, we’ll provide more details on laminate installation.

Laminate Flooring Installation

First of all, you’ll need the following materials and tools:

  • Click-lock laminate flooring
  • Underlayment
  • Plastic Sheeting
  • Tape Measure
  • Rubber Mallet
  • Pencil
  • Straightedge
  • Spacers
  • Tapping Block
  • Painting Tape
  • Wood Putty
  • Painting Tape
  • Hand Saw or Circular Saw

It might seem like a lot, but the top three are crucial to the sturdiness of the floor, you probably have the middle four somewhere around the house, and the bottom six can be found reasonably priced at your local hardware store.

1: Ensure that the subfloor is both clean and level.

One nice part of laminate flooring installation Dallas, TX is that it can be laid over basically any type of subfloor. This includes wood, tile, and concrete. However, in making sure the laminate floor is level, the subfloor must be level, regardless of what type it is.

Before laying the underlayment or the floor planks, clean the subfloor and check for damage and unevenness. There are ways to fix the unevenness, but the problem can only be solved if it’s noticed early on.

Step 2: Place the underlay

There are all kinds of underlay options available to homeowners. The majority of choices will consist of foam material. Foam absorbs sound, offers a gentle cushion for foot traffic, and acts as a barrier to enhance insulation. Most importantly, an underlay can nullify any slight unevenness to the subfloor. All you have to do is place the underlayment over the subfloor and tape it secure by the edges with painters tape. As you’d probably guessed, you’d need to make sure the underlay is free from wrinkles.

If the subfloor has significant damage or is significantly unlevel then a layer of plywood would probably be needed to be laid before applying the underlay, sheeting and flooring.

Step 3: Preliminary Layout

Before you get into actual installation, create a layout by putting the laminate planks where you plan to install them. This will give you an idea of which planks need to be cut and how many rows of planks you’ll need. It’ll also give you an overview of what the end result will look like.

Step 4: Take your time laying the 1st Row

The first row of laminate is the most important. It’s important to start off on the right foot;a bad start could force you to redo the project. You’ll have to cut the tongues off the boards that are going to face the wall. Each plank has a tongue and a groove. One side of one plank (the tongue) will click and lock into the other side of the other plank (the groove) like a puzzle.

Since the tongues of the planks facing the wall won’t have anything to attach to, you can cut them off. Lay the first row parallel to the longest wall in the room; start from the right and work left (if facing the wall). Place spacers about ¼ inch between the wall and the first row of planks. The ¼ inch gap is important because it allows space for possible expanding and contracting over time.

As for the ends of the planks, take your rubber mallet and tap one end 2-3 times to make sure the seams are firm. Don’t tap to hard otherwise the ends may split.

Step 5: The following rows

It won’t take long for you to get into a rhythm with laminate flooring installation. Once you finish the first row, you’ll basically be repeating the process with the following rows. It’s likely that cutting will be needed at the conclusion of each row. You’ll have to cut the end pieces to make them fit against the wall, or in this case, up against the spacer. The excess piece that you cut can be the piece to start the next row, and so on and so forth.

Make sure each laminate plank is staggered to avoid seams from lining up. Seams that lineup will reduce the overall appeal and charm of your new flooring.

Step 6: Finish the job

Take out the spacers and install the baseboards to cover up the ¼ inch gap. When nailing the baseboards back in, it helps to take wood putty and fill the hole created by the nail. Just paint over it and no one will even know it was ever there.

Those are the basic steps. Your laminate wood packaging should come with a manufacturer’s manual with more detailed instructions. We just wanted to give you an idea as to the ease of laminate flooring installation. The cutting part can be a bit tricky; it’s best to have someone who’s experienced with a saw handle that part. Other than that, it works like putting a puzzle together.

What makes laminate laminate?

Laminate is made up of multiple layers that are fused together to create one plank. The layers in order from top to bottom include:

Melamine Wear layer– withstands the wear and tear of general foot traffic in a particular room. It’s a scratch-resistant layer.

Print Layer– simulates real wood using a sophisticated high-resolution image. For example, you can capture an image of an oak floor and use it to produce a printed design for a laminate plank. The image emits has a similar feel to that of the actual wood floor.

Fiberboard, commonly referred to as the core, constitutes the thickest layer with a typical width ranging from 8 mm to 14 mm. This layer plays a crucial role in safeguarding the plank from both dents and moisture.

Backing– Additional layer meant to support the core layer and provide yet another path of resistance to moisture that may try to seep through.

No.1 Best Laminate Flooring Installation Dallas - Toscana Remodeling Why is laminate a good flooring choice?

We’ve thoroughly covered how easy it is to install laminate flooring in Dallas, TX. What additional benefits does laminate provide?

Its affordability is what attracts many customers to laminate flooring. Since it doesn’t have real wood, you won’t have to pay as much as a real wood floor. You’d be getting a less expensive floor that very closely imitates hardwood and even triumphs hardwood with regards to certain aspects.

For example, laminate flooring can better withstand moisture than hardwood flooring can. Its layered composition makes it more difficult for any moisture to get through. Also, real wood is not part of laminate, so you won’t have to worry about the effect that water has on wood, such as how moisture on hardwood flooring results in molding, cupping, or crowning.

In the end, laminate flooring is meant more for functionality than it is appearance. It’s a flooring that has a nice look, but also stands out through its ability to withstand everyday living. Laminate flooring, which has the capability to resist moisture damage, can be installed in areas of a house where hardwood is not suitable. For example, bathrooms, kitchens, basements, and laundry rooms.

Laminate will typically cost $4- $5 per square foot. In general, it’s cheaper than other popular floor options, such as hardwood, stone, porcelain and ceramic. You can also take into account the fact that laminate flooring installation is much cheaper compared to that of other flooring. Even if you choose not to install your laminate flooring yourself, you have the option to hire professional installation services at an affordable cost. Experts can quickly install laminate flooring.

What else?

Laminate flooring is also easy to maintain. Maintaining a tidy surface only requires a vacuum, mop, and broom. Dust and debris have nowhere to penetrate, so any of those cleaning tools will effectively keep your floor shiny and clean. Even though laminate isn’t completely waterproof, you won’t run into any issues if you use a wet mop to wipe the floor. Simply avoid pouring the water directly onto the surface. Instead, dip the mop in a pail of water and then proceed to clean the floor.

Additionally, laminate flooring is considered hypoallergenic. Since the surface is flat, dust does not collect and, as long as you clean as needed, your family won’t have to worry about allergies. Most floors are fine for those who suffer from allergies; the main exception is carpeting. All kinds of dust and debris get stuck in carpet. That’s why carpet must be vacuumed at least once a week.

Laminate is more versatile than it might look. If you recall the composition of laminate we discussed earlier, it has a print layer. The print layer isn’t just reserved for hardwood prints. Stone flooring and wood tile prints are also options. Whatever flooring type you desire, you can make it come true with laminate. Moreover, if your budget doesn’t allow for the real thing, laminate is without a doubt a worthy alternative.

The one downside to laminate flooring…

It does not have the longevity of many flooring options. Eventually, the wear layer will wear away. When the protective surface layer deteriorates, the flooring becomes more susceptible to scratches and overall wear and tear.

Hardwood is also susceptible to wear and tear, but the advantage is that it can undergo sanding and refinishing, effectively generating a completely new surface. Laminate flooring doesn’t share the same characteristics.

The majority of laminate flooring products typically come with a warranty that spans a duration of 10 years. Expect the floor to last around that long, maybe up to 15 years. If you take great care of the floor then you might add a few more years beyond that. In the end, you receive the value corresponding to your payment.

You receive a cost-effective floor that is dependable, adaptable, and easy to manage. Plus, laminate flooring installation is easy and affordable in itself.

Conclusion

Laminate Flooring Installation Dallas is a practical, budget-friendly option that you can install yourself with the right guidance. Its versatility, affordability, and easy maintenance make it an attractive choice for various spaces in your home.

FAQs

  1. Is laminate flooring suitable for all rooms in Dallas?
    • Yes, Laminate Flooring Installation Dallas is suitable for most rooms, excluding those with excessive moisture, such as full bathrooms.
  2. Can I install laminate flooring over existing tiles in Dallas?
    • Yes, Laminate Flooring Installation Dallas can be installed over various existing floor types, including tiles.
  3. How often should I clean my laminate floor in Dallas?
    • Regular cleaning with a vacuum or mop is sufficient for Laminate Flooring Installation Dallas. Avoid excessive water on the surface.
  4. Does laminate flooring look fake in Dallas?
    • Modern laminate flooring replicates the look of real wood convincingly, providing a realistic appearance in Laminate Flooring Installation Dallas.
  5. Can I install laminate flooring on stairs in Dallas?
    • Yes, Laminate Flooring Installation Dallas can be installed on stairs with the proper nosing.

Toscana Remodeling

If you are interested in laminate flooring, give Toscana Remodeling a call! We always have plenty of laminate flooring options in stock, and we always have plenty of flooring experts around to answer any leftover questions that you might have after reading the above information.

Also, if you need laminate flooring installation Dallas, Toscana Remodeling can help! We’ll complete an estimate to figure out the dimensions and then we’ll complete the installation in a timely manner.

Please visit our website—toscanaremodeling.com—to learn more about our products and services. Also, check out our blog for more helpful input.

Associations

Mohawk Logo
Marazzi Logo
Emser Tile Logo
Puccini Logo
Interceramic Logo
Call Icon

Call us today

for a FREE in home consultation

972-406-8881

or

Toscana Remodeling is Available for All Your Home Improvements.
Call or Email for an Appointment Today!

Pin It on Pinterest

Share This